Cookie Img Back to top
   Call Me Free Send SMS Send Inquiry
Home » Products » Flex And Force Sensor

Flex And Force Sensor

Flex Sensor 4.5 Inch
close
Flex Sensor 4.5 Inch
flex-4-5
A simple Flex Sensor 4.5 Inch in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo power glove. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1 Inch spaced and bread board friendly. Check datasheet for full specifications.
FlexiForce Sensor A301-1 lbs Low
close
FlexiForce Sensor A301-1 lbs Low
flex-A301-1
The A301 design is optimized for high volume manufacturing and is ideal for embedding into products and applications. This sensor is available in low and high quantities off-the-shelf, ideal for an easy proof of concept. The A301 sensor is designed to use with your own electronics or multimeter. The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.
FlexiForce Sensor A301-25 lbs Medium
close
FlexiForce Sensor A301-25 lbs Medium
flex-A301-25
The A301 design is optimized for high volume manufacturing and is ideal for embedding into products and applications. This sensor is available in low and high quantities off-the-shelf, ideal for an easy proof of concept. The A301 sensor is designed to use with your own electronics or multimeter. The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.
FlexiForce Sensor A201-100lbs
close
FlexiForce Sensor A201-100lbs
flex-A201-100
A201 sensors are trimmable and have a 3-pin male connector. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb)*.
Flex Sensor 2.2 Inch
close
Flex Sensor 2.2 Inch
flex-2-2
A simple Flex Sensor 2.2 Inch in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1 Inch spaced and bread board friendly. Check datasheet for full specifications.
FlexiForce Sensor A101
close
FlexiForce Sensor A101
flex-A101
The FlexiForce A101 is our smallest standard piezoresistive force sensor. The A101 design is optimized for high volume manufacturing and is ideal for embedding into products and applications.
FlexiForce Sensor A201-25lbs
close
FlexiForce Sensor A201-25lbs
flex-A201-25
The FlexiForce A201 is our standard sensor and meets the requirements of most customers. The A201 is a thin and flexible piezoresistive force sensor that is available off-the-shelf in a variety of lengths for easy proof of concept.
FlexiForce Sensor A401-25 lbs
close
FlexiForce Sensor A401-25 lbs
flex-A401-25
The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area: 25.4 mm (1 in.). A401 sensors are available in one force range: 111 N (0 - 25 lb).* The force ranges stated are approximations. The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
FlexiForce Sensor A502
close
FlexiForce Sensor A502
flex-A502
A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).


RAJGURU ELECTRONICS (I) PRIVATE LIMITED
399, 3rd Floor, Manek Chambers, Above Vasant Bhavan Restaurant Lamington Road, Mumbai - 400004, Maharashtra, India
Phone :+917042155185
Mr Dileep Jain (CEO)
Mobile :+917042155185
Phone No : 022- 23822040
Mobile No : +917400168411
Trust Stamp
Product Showcase
   Call Me Free Send SMS Send Inquiry